航空锂电池适航审定规章解读及符合性方法研究

锂离子电池作为动力电池有着优异的性能,在民航行业上有广阔的应用前景。但行业对其技术特征 和安全风险的认识还不充分,现行的规章条款缺乏足够的安全要求,国外局方针对锂离子电池颁发了专用条 件,但回顾相关事故可以发现,锂离子电池的验证和审查环节还不完善,相关条款更新修正的步伐也同锂电池 的发展现状和技术水平不相适应。以航空锂电池事故为例,分析航空锂离子电池作为动力电池的安全性风险, 从对现有规章条款和专用条件的解读出发,借鉴不同行业近年来积累的锂电池验证和使用经验,针对航空动力 锂电池的适航符合性方法提出一些改进方案,可作为现有锂电池适航符合性方法的有益补充,为自主建立健全 适航验证规范体系做出探索。     

支线飞机替换战略的经济性分析

随着中国城市化进程的发展,西部地区和三四线城市的航空出行需求快速增加。航空公司通常采用干线飞机投入西部航线和三四线城市航空市场,由于客座率不高且航班频次不足,航空公司经济效益不高,西部地区和部分三四线城市的航空出行需求也未得到充分满足。为解决供需矛盾,采用国产某支线飞机替换部分航线经济效益不好的干线飞机虽被提上日程,但是对于替换战略的经济性缺乏定量描述,航空公司始终处于观望状态,进而制约了支线飞机的市场推广。为解决上述问题,构建支线飞机替换战略的经济性模型,随后进行模型验证与仿真分析,比较支线飞机和干线飞机的航段收益,分析所有权模式和关键费用驱动因子对支线飞机运营经济性的影响规律,进而提出支线飞机的优势区域和提升运营经济性的有效措施。     

翼吊短舱形式发动机安装效应的风洞试验研究

为了确定实际飞行使用条件下,发动机状态变化时,进排气系统损失对飞机气动特性的影响,本文针对翼吊短舱形式的发动机开展了缩比模型风洞试验,分别进行了基本构型与起飞构型下,马赫数0.1、0.15、0.2,攻角0°~15°变化,5种不同发动机状态条件下的风洞试验,通过数据分析,明确了该类型发动机推/阻力划分的基本方法,分析了发动机状态变化时飞机气动特性的改变及修正方法。风洞试验结果表明：发动机状态变化对飞机升阻特性影响明显,飞机设计研发阶段不能仅对短舱通流模型,或单一发动机状态下的动力短舱模型进行损失修正,必须建立合理的推/阻划分体系,对实际使用条件下,发动机状态变化引起的进排气损失进行修正。     

基于SE模块改进Xception的动物种类识别

Xception是Inception网络的一种极端化表现,在与Inception v3参数相近的情况下,它能够达到更高的准确度。由于神经网络提取的特征不一定都是有用特征,因此以Xception为基础,将SE(Squeeze and Excitation）模块加入该网络,调整特征通道的权重,使得网络的精确度得到提高。通过实验,融合SE模块的Xception网络训练精确度分别在Oxford-IIIT Pet数据集和CUB_200_2011数据集上提升了1%~1.7%和0.8%~1%,证明了SE模块能够进一步提升Xception的精确度。将改进后的Xception应用到动物种类识别中,根据精确度曲线对实验策略调整改进,最终在测试集上获得95.63%的识别率。     

基于DS算法的混胺燃料近红外光谱分析模型传递

对混胺燃料的近红外光谱分析模型的传递方法进行研究。采用 K/S(Kennard/Stone)算法选择转换集样品,采摘用直接校正(Direct Standardization,DS)算法对从仪器采集的光谱进行校正。通过光谱平均差异(ARMS)比较奇异值分解(Singular Value Decomposition,SVD)算法和偏最小二乘法(Partial Least Squares,PLS)对光谱校正的效果。当 PLS算法的最佳主因子数为 3时,DS-PLS算法的光谱校正率可达到 97.5%,优于 DS-SVD算法。混胺样品的分析模型经过 DS-PLS算法传递后,对从仪器的混胺样品各项指标的预测标准偏差(SEP)明显好于传递前,与主仪器预测效果接近,说明采用 K/S算法选择合适的转换集样品后,通过 DS-PLS模型传递算法可有效降低仪器间的光谱差异,实现近红外光谱分析模型在各台光谱仪之间共享。     

Stationary flow fields prediction of variable physical domain based on proper orthogonal decomposition and kriging surrogate model

In this paper a new flow field prediction method which is independent of the governing equations, is developed to predict stationary flow fields of variable physical domain. Predicted flow fields come from linear superposition of selected basis modes generated by proper orthogonal decomposition(POD). Instead of traditional projection methods, kriging surrogate model is used to calculate the superposition coefficients through building approximate function relationships between profile geometry parameters of physical domain and these coefficients. In this context,the problem which troubles the traditional POD-projection method due to viscosity and compressibility has been avoided in the whole process. Moreover, there are no constraints for the inner product form, so two forms of simple ones are applied to improving computational efficiency and cope with variable physical domain problem. An iterative algorithm is developed to determine how many basis modes ranking front should be used in the prediction. Testing results prove the feasibility of this new method for subsonic flow field, but also prove that it is not proper for transonic flow field because of the poor predicted shock waves.     

有翼高超声速再入飞行器气动设计难点问题

有翼高超声速再入飞行器是近年来的研究热点,气动设计是飞行器设计的关键。为了更清楚地认识有翼高超声速再入飞行器气动设计的难点问题,对有翼高超声速再入飞行器的发展、优势及总体任务剖面进行了介绍,从5个方面详细介绍了该类飞行器气动设计的难点问题,包括多约束复杂面对称气动布局设计、高温真实气体效应对气动特性影响、天地差异与天地换算方法、反作用控制系统(RCS)喷流干扰对气动特性的影响以及气动数据不确定度等,简要阐明了这些难点问题对总体设计的重要性以及初步的解决思路,为有翼高超声速再入飞行器气动设计提供了一些参考。     

高超声速边界层的转捩及预测

首先描述了边界层转捩的基本过程及研究内容。在此基础上,指出了高超声速边界层不同于不可压缩边界层的流动不稳定性特性,并介绍了边界层的转捩机理与感受性特征;给出了高超声速三维边界层中预测转捩的常用方法,并着重介绍了多用于工程实际的e N方法以及对e N方法的理性改进,同时列举了在高超声速三维边界层中应用e N方法实现转捩预测的多个实例。最后,分析并总结了高超声速边界层转捩预测所存在的困难及需要解决的问题。     

Specific grinding energy and surface roughness of nanoparticle jet minimum quantity lubrication in grinding

Nanoparticles with the anti-wear and friction reducing features were applied as cooling lubricant in the grinding fluid. Dry grinding, flood grinding, minimal quantity of lubrication（MQL）, and nanoparticle jet MQL were used in the grinding experiments. The specific grinding energy of dry grinding, flood grinding and MQL were 84, 29.8, 45.5 J/mm³, respectively. The specific grinding energy significantly decreased to 32.7 J/mm³ in nanoparticle MQL. Compared with dry grinding, the surface roughness values of flood grinding, MQL, and nanoparticle jet MQL were significantly reduced with the surface topography profile values reduced by 11%, 2.5%, and 10%,respectively, and the ten point height of microcosmic unflatness values reduced by 1.5%, 0.5%,and 1.3%, respectively. These results verified the satisfactory lubrication effects of nanoparticle MQL. MoS₂, carbon nanotube（CNT）, and ZrO₂ nanoparticles were also added in the grinding fluid of nanoparticle jet MQL to analyze their grinding surface lubrication effects. The specific grinding energy of MoS₂ nanoparticle was only 32.7 J/mm³, which was 8.22% and 10.39% lower than those of the other two nanoparticles. Moreover, the surface roughness of workpiece was also smaller with MoS₂ nanoparticle, which indicated its remarkable lubrication effects. Furthermore,the role of MoS₂ particles in the grinding surface lubrication at different nanoparticle volume concentrations was analyzed. MoS₂ volume concentrations of 1%, 2%, and 3% were used.Experimental results revealed that the specific grinding energy and the workpiece surface roughness initially increased and then decreased as MoS₂ nanoparticle volume concentration increased.Satisfactory grinding surface lubrication effects were obtained with 2% MoS₂ nanoparticle volume concentration.     

测量兆欧表中值电压和开路电压的一种方法

提出了一种仅用一台通用高阻标准器和台式数字多用表来完成兆欧表中值电压和开路电压的计量方法。通过调节高阻标准器的阻值以及改变和数字多用表的连接方式,组合出所需的测量电路。实验结果表明,该方法实用性强,操作方便,灵活度高,减低了成本,提高了设备的使用率。